lever-controlled oxygen petrol cutting torch set

lever-controlled oxygen fuel cutting torch,no backflash metal cutting torch,fuel-saving,exceed acetylene/propane cutting torch
lever-controlled oxygen petrol cutting torch set (CE/ISO9000),no backflash metal cutting torch,fuel-saving

Full set of GY30C includes following parts:
1) one GY30TC cutting torch assembly
2) three GY30N cutting nozzles for different cutting thickness.
3) one 10L explosion-proof gasoline tank
4) 10M cutting twin-hose
5) one suit of tools required in operating GYJD cutting torches.


Please check the following table of technical & economical index comparison.

Oxy-petrol cutting torch
Oxy-acetylene cuttting
Flame temperature
2870
3000

cutting performance
Preheating time
A little slow for thick steel
fast
Cutting speed
Faster for thick steel
100800mm/m
Oxygen consumption
1.2~1.5M
3
/KG
1.2~1.4M
3
/KG
Adhering slag
Less slag, easy to clean
Much slga, hard to clean
Cutting slit
smooth,small affected heating area
Big affected heating area
Depth of punched hole
<250mm
<60~80mm
Multilayer steel cutting
Easy to cut 10mm X 15 layers steel like cutting one layer of 150mm steel
Hard to cut
Safety
Backflash
No backflash risk
Easy to backfalsh
Fuel tank
Military explosion-proof material inside the tank, no blast
Compressed gas cylinder, dangerous and easy to explode
Economical performance
It can save RMB8.5~12/ hour. 3L gasoline = one cylinder of acetylene
7-10 times of gasoline cuting torch
Environment Pollution
NO
pollute badly
Harm to user
NO
carcinogenic