oxy-gasoline cutting torch (PK acetylene cutting torch)

innovative oxy-fuel cutting torch----gasoline cutting torch
perform better than acetylene cutting torch
faster cutting
Safe
oxy-gasoline cutting torch

Cutting thickness of GY30C: 3-40mm
cutting thickness of GY100C: 40-100mm
cutting thickness of GY300C: 100-300mm
cutting temperature: 2800-3000 degree
cutting fuel : oxygen & gasoline
cutting twin-hose: 10M
capacity of fuel tank: 10L
Please check the Gasoline Cutting Torch PK acetylene cutting torch as following:
1) The cutting speed is same as acetylene torch when the steel is under 6 mm thick;
2) Cut 50% faster than acetylene torch when the steel is 60-100MM;
3) Cut 100% faster than acetylene torch when the steel is 200-300MM steel;
4) 30-50 seconds to cut a Φ100mm shaft
5) 90-120 seconds to cut a Φ150mm shaft
6) 4-5 minutes to cut a Φ300mm shaft;
7) 2-3 minutes to punch a hole in a 100-200mm thick steel.

The oxy-gasoline flame easily cuts through multiple layers of steel at the same cutting speed as of cutting one block. E.g. cutting 15 layers of 6 mm thick steel is like cutting one layer of 90mm thick
GYJD gasoline cutting torch can safely and quickly punches holes up to 10 inches deep. The oxy-gasoline flame has no back-flash into the fuel line.
GYJD has an extremely long tip life. A tip with good care can last for years. The atomization of gasoline at the tip is a cooling process which cools down the tip during the operation.