gasoline cutting torch system (CE/ISO9000 Approved)

CE&ISO9001 & patented gasoline cutting torch
fuel-saving cutting torch
remarkably safe cutting
good cutting quality
fast cut
gasoline cutting torch system (CE/ISO9000 Approved)
Model No.: GY30 GY100 GY300
temperature of cutting flame: 2800-3000 degree
cutting thickness: 3-300mm
cutting nozzles: 10 different sizes
cutting twin-hose; 10M
cutting torch: Handgrip type

If you are using oxy-acetylene or oxy-propane or LPG cutting torch, why don't you have a try to use oxy-gasoline cutting torch system? Please check the following comparision between oxy-acetylene cutting torch and oxy-gasoline cutting torch:

1) when the steel is under 6 mm thick, gasoline cutting torch has same cutting speed as oxy-acetylene torch
2) Cut 50% faster than acetylene torch when the steel is 60-100MM;
3) Cut 100% faster than acetylene torch when the steel is 200-300MM steel;
4) 30-50 seconds to cut a Φ100mm shaft
5) 90-120 seconds to cut a Φ150mm shaft
6) 4-5 minutes to cut a Φ300mm shaft;
7) 2-3 minutes to punch a hole in a 100-200mm thick steel.

The oxy-gasoline flame easily cuts through multiple layers of steel at the same cutting speed as of cutting one block. E.g. cutting 15 layers of 6 mm thick steel is like cutting one layer of 90mm thick
GYJD gasoline cutting torch safely and quickly punches holes up to 10 inches deep. The oxy-gasoline flame has no back-flash into the fuel line.